Back to home page
Sliding Wardrobe World are please to support The Lily Foundation
Sliding Wardrobe World endeavour to match or even beat any genuine like-for-like quote
Your basket

Total: £0.00 View

 
Call us for sliding wardrobe design advice
 
 

S9 Room Divider (Double-Sided) and Angled Made to Measure Wardrobe Doors - Technical Specifications

Made to measure Sliding Wardrobe Door technical features
  • E Top Track for easy installation and adjustment
  • 1 soft close per door as standard
  • Maximum opening height of 2500mm
  • Minimum recommended opening height of 1000mm
  • Maximum Opening width of 5000mm
  • Maximum door width of approx 1220mm
  • Minimum recommended door width of 400mm



Sliding Wardrobe Door Frame widths and overlaps between front and rear doors
Generally we will build your doors so that the overlap between front and rear doors is the same as the width of the door frame. We do this for aesthetic reasons only. You may notice that the door visualizer shows no overlap. This is just due to limitations in the software.


Sliding Wardrobe Door Overlap and frame widths
S9 Room Divider (Double-Sided Wardrobe Doors): = 25mm Aluminium Frame [30mm overlap]
S9 Angled Wardrobe Doors: = 25mm Aluminium Frame [30mm overlap]

 

Sliding Wardrobe Door Running Gear Durability 
All our sliding wardrobe wheels and guides are cycle tested to 100,000 opening and closing actions in accordance with ANSI BHMA A156.14, This is an American National Standard, created in conjunction with Builders Hardware Manufacturers Association.  The reason we test to this standard is because it’s the most rigorous sliding wardrobe door standard in the world, and enables our hardware to be sold to the contract market in the USA, and enables us to confidently guarantee our running gear for 10 years of continuous use.All our sliding wardrobe wheels and guides are cycle tested to 100,000 opening and closing actions in accordance with ANSI BHMA A156.14, This is an American National Standard, created in conjunction with Builders Hardware Manufacturers Association. The reason we test to this standard is because it’s the most rigorous sliding wardrobe door standard in the world, and enables our hardware to be sold to the contract market in the USA, and enables us to confidently guarantee our running gear for 10 years of continuous use.

Sliding Wardrobe Door Soft Close Durability
Our soft close system is tested to 40,000 open and closing actions in accordance with the German LGA Quality Directive, and RAL-GZ430 and DIN EN14749.

Sliding Wardrobe Door Framing
S9 door frames and tracks are manufactured from extruded aluminium. This ensures a lifelong sturdy frame to your door, and will not be prone to damage or warping like some lower quality chipboard or MDF framed doors. They also have the advantage over wood in that they will not bow over time.

Sliding Wardrobe World Top and Bottom Tracks
Top and bottom tracks are also manufactured from extruded aluminium.

Sliding Wardrobe Door Mirror and Gloss Glass
High gloss glass panels are lacquered on the reverse face, to provide the highest quality gloss surface panels on the market. Mirror is high quality silver coated. All mirror and glass panels are safety laminated to pass BS6206, and Class 2B2BSEN 12600. This ensures that you cannot fallthrough our glass or mirror panels, and if they were to break, then they crack in safe manner.

Double Sided Sliding Wardrobe Doors
Where the double sided option is selected, you can specify the opposite side in contrasting colors, or the same if using glass or mirror. If you specify a wood/MFC finish, then the reverse side will be the same as the front.

FSC Environmental Panels
All our panels are manufactured from FSC certified timber and particle board.  FSC is the Forestry Stewardship Council certificate that guarantees our products come from environmentally managed sustainable forests.

Sliding Wardrobe Door Safety
As well as all our glass panels being safety laminated, our bottom wheels also come with an ‘anti jump’ spring to keep your wheel in the bottom track if the door was to jump for any reason.

Dimensioned Cross Section

All dimensions in mm, and are nominal (i.e. subject to manufacturing tolerances).



S9 Angled Made to Measure Wardrobe Doors - Technical Specifications


Please Note: For Sliding Wardrobe World Angled Wardrobe Doors, you will require a shelf inside the wardrobe for attaching a specially design track.

You should also not that angled doors do not have soft close, and due to their shape, and nature of the track and running gear; they have a bit more 'wobble' than a rectangular door. That said, they are still a great option for making use of that awkward space under a sloping ceiling.

Our S9 Series Angled Sliding Wardrobe Doors can be made to fit most angles, so are the perfect Sliding Wardrobe for loft conversions, attic rooms or bedrooms with sloping ceilings.

The steering of the door is transferred from running gear mounted at the top of the door to a stabilising wheel mounted on the front of an interior shelf, as shown in the images to the left. This shelf can be located anywhere behind the top 60% of the door.

Where the door is angled such that no part of the door is located in the top track, the door is stabilised by two tracks located on interior shelves, as shown in the image to the left.

The hardest part of specifying angled doors is getting the angled dimensions correct. To help you with this, we supply an extra piece of top track that goes down the angled part of the ceiling/staircase. This will cover any minor inaccuracies in the angle of the door versus the angle of the ceiling.

Click here for instructions on how to measure for S9 Angled Sliding Wardrobe Doors from Sliding Wardrobe World.